Double Glazed Door Lock Replacement
Double glazed door locks can appear like a daunting task, but with the right tools and step by steps instructions, it's doable. The replacement of your window lock will improve the energy efficiency of your office or home and also provide additional security.
Begin by removing the retaining screw from the faceplate of the lock cylinder. Then, using a screwdriver, twist it to the left and then remove the cylinder.
Replacement Cylinders
Euro lock barrel locks or door cylinders can be found in almost all uPVC double-glazed uPVC doors. They provide security and dependability and have been verified to function. Replacement of a cylinder can be required due to a key being lost or stolen however, it can also be due to the aging process and the possibility of corrosion. Cylinders come in different sizes, styles and finishes to match your door. Depending on your needs you can pick between cylinders with 1-star or 3-star ratings that are secured by insurance endorsed Kitemarks BSI.
Cylinder locks are based on simple pin & barrel systems which have been used for many years in most if not all uPVC doors. The weakness of these types, however, is that burglars could easily manipulate them with tools that allow them to "snap" and gain access to the home. We suggest replacing your cylinders using snap-resistant cylinders to safeguard yourself from this common method of burglary.
To remove the old cylinder first of all open your door and locate the screw at the edge of the door, between the outer handle and the inside handle. The screw will typically stand out from the other screws since it's a different colour. The screw can be removed completely using a screwdriver. If the screw won't budge Try applying 3 in 1 oil and let it sit for about an hour. This may help, alternatively you can chisel into the head of the screw in the direction of 'unscrew' to slam it loose.
After kettering door lock repairs have removed the screws for the handle and loosening the cylinder, you can do this by rotating it in any direction (the direction will depend on the side of your door the locking mechanism is located). Once the cylinder has been loose, pull it toward you and remove it. Then measure the cylinders width and length to purchase a replacement.
We offer a variety of half and full cylinders, as well as a variety of security cylinders, which are rated for anti-snap resistance and anti-bump. These are BSI kitemarked and Secured by Design certified as well as offering the highest levels of physical security for your home.
Replacement handles
If you're replacing handles on the uPVC front door, there are plenty of designs and colours to choose from. But the most important thing is to ensure that the new handle fits properly. The screw size and keyhole size must match. Use our guide to determine the measurements of uPVC handles. This will ensure that you have the most accurate measurements and buy the correct handle. It's also worth thinking about upgrading to a security set of handles. This will ensure your door is secure and keep potential thieves from being able to access the locks on your uPVC front doors.
You will be able to pick up replacement handles for your double-glazed doors at most major uPVC handle suppliers. Companies like ERA Avocet Millenco offer a variety of lever and lever-lever handles available in different finishes. You can pick a lever handle that has a snib for additional security.
Depending on the needs of your business, depending on your needs, you may have to replace the entire handle or just the handle lever. This is often due to wear and tear but could also be due to an issue with the mechanism of your lock. If you're having issues with your lock system, it's probably best to contact an Locksmith to solve the issue for you, however if it's just the handle you require replacing, then you can do this yourself.
Once you've made your measurements after which you can compare them to the sizes of replacement handles available on the market. The most common size for uPVC door handles is 92pz, but there are also 70pz and 68pz sizes. The new handle must have a backset and a faceplate that are compatible. This will ensure that the screw holes line up correctly and won't cause damage to the lock inside the door.
If you're replacing the handles on your doors and wish to upgrade to a higher level of security, then it's recommended to consider Sold Secure SS301 or 2* Kitemark set of handles. These are a good option because they're endorsed by the police and feature a patented anti-drill and anti-pick features.
Faceplates for replacement
Door keeps and faceplates are the last protection against intruders, they signify to any would-be burglar that your home is secured which stops them in their tracks. They are crucial and should be purchased from a reputable hardware shop whether online or in person. This will allow you to ensure that you are getting a quality device that will be long-lasting and will shield your doors and windows from damage and corrosion over time.
It is also important to be aware of the distinctions between multipoint uPVC lock and a single point one, they can differ as much as apples and oranges. Based on the lock you're installing, you'll need to choose the appropriate backset and faceplate, a backset is the distance between edge of the door and centre of the cylinder or handle and a 'faceplate' is a metal strip that covers the edges of the mechanisms. These are the main factors that will determine which parts you will need to replace for your new uPVC locking system. Then it's just a case of following the easy instructions for installing them!
Replacement locks
Depending on your preference There are many options available when it comes to replacement locks for uPVC doors. They are usually made to withstand pressure and provide enhanced security for your home. There are uPVC multipoint locking systems that are suitable for commercial use. They are typically provided by trusted manufacturers, such as Fullex centre door lock gearboxes and Gardinia doors locks made of uPVC.
When selecting a replacement window lock, you must be aware of the type of backset and faceplate you require. Ensure the new lock matches these to make sure it's secure and fits properly. For instance, if the current lock has a 35mm backset as well as a split spindle, then it might be beneficial to buy a new uPVC door handle that has an appropriate gearbox, such as the Laird Saracen Surelock.
In the same way, you must ensure the new lock you choose is compatible with the size of the handle hole and faceplate of your existing windows. This is vital to ensure a seamless integration of the handle and window lock.
After you have chosen the replacement lock you can then put it on your window. It is recommended to talk to your local locksmith when you are doing this. They will be able to assist you in locating the appropriate lock. Lastly, you should test the new lock to ensure it's functioning properly.
To avoid this, replace your double-glazed windows with locks with a high-quality lock that can withstand forced entry. This will secure your valuables from burglary and keep your family safe. Replacing your window locks is a reasonable alternative that can improve the security of your property. It can be a challenge when you're not experienced with the procedure. To be successful in the process it is essential to follow these steps.